headstock bearings and seals ktm xc525 xc 525 2006 2007 Honda CB1100 Kawasaki GPZ 750 (ZX750 A)

Kawasaki GPZ 750 (ZX750 A) (1983-1985)

It is 90mm from centre to centre with 2 spade connectors and 2 HT leads leading to all 4 cylinders

This set of brake pads will fit the front and rear brake on a Kawasaki Ninja300 for the years and models shown above

This set of steering stem bearings will replace the original head stock bearings on a 1989 DT200 R

This cylinder kit has been manufactured to replace the original top end on an Aprilia Gulliver 50 for the years and models shown above

headstock bearings and seals ktm xc525 xc 525 2006 2007 Honda CB1100 Kawasaki GPZ 750 (ZX750 A)Brand new set of headstock steering bearings and seals to fit: KTM XC 525 Racing (2006 2007). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM XC525 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require